Motor for electrical cabinet cooling fan Morris 5151 or 71

5151 or 71

This roller is suppled as a bare core and the fittings will need to be transferred from the old roller

8mm wide gripper for the later series SM/CD102 approximately from 1994

This has the cam slot on both sides so can operate either left or right

This is the 74mm overall length plate clamp stud sometimes found on GTO presses

Motor for electrical cabinet cooling fan Morris 5151 or 71Photo shows complete fan unit, but only the motor and capacitor is supplied. These motors often go faulty but the fan unit is okay. It is not difficult to fit but it is mains voltage so appropriate care should be taken. Heidelberg equivalent: 71. 115. 2501